24-4360 Puller

WARNING: This page is about a different car, the 2011 BMW X6 and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

0495599 244360 Puller Minimum set: Mechanical tools MW

NOTE: For withdrawing output shaft seal (4x2). [Released]

Storage Location

A24

Fig 1: Identifying Puller (0495599)

Courtesy of BMW OF NORTH AMERICA, INC.

SI number

01 02 07 (334)

Consisting of:

4 = 0496116 Spindle
NOTE: [Discontinued]
1 = 0496113 Basic body
NOTE: Discontinued, only available via complete tool [cannot be ordered separately]
2 = 0496114 Claw
NOTE: (Claw (4 pieces)) Discontinued, only available as part of complete tool [Cannot be ordered individually]
3 = 0496115 Screw
NOTE: Discontinued, only available via complete tool [cannot be ordered separately]