24-4320 Puller

WARNING: This page is about a different car, the 2011 BMW X6 and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

0495496 244320 Puller MW

NOTE: For withdrawing output shaft seal (four-wheel drive). [Discontinued]

Storage Location

C23

SI number

01 02 07 (334)

Fig 1: Identifying Puller (0495496)

Courtesy of BMW OF NORTH AMERICA, INC.

Consisting of:

= 0495569 Basic body
NOTE: [Discontinued]
= 0495570 Ring
NOTE: (Coupling ring) [discontinued]
= 0495571 Spindle
NOTE: [Discontinued]
= 0495572 Hook wrench
NOTE: [Discontinued]