24-2350 Puller

WARNING: This page is about a different car, the 2011 BMW X6 and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

0494201 242350 Puller Minimum set: Mechanical tools MW

NOTE: For pulling out the radial shaft seal on torque converter and on output flange [Released]

Storage Location

A46

SI number

01 14 01 (766)

Fig 1: Identifying Puller (0494201)

Courtesy of BMW OF NORTH AMERICA, INC.

Consisting of:

= 0494202 Puller
NOTE: [Discontinued]
= 0494203 Spindle
NOTE: (Spindle M12 x 65 with ball head) Discontinued, only available via complete tool [Not available separately]
= 0494204 Synchronizing key
NOTE: [Discontinued]
= 0495597 Synchronizing key
NOTE: Transmission: GA6L45R (GM6) Liquidation of existing inventory and then available only as a complete tool set 24 2 350 (83 30 0 494 201) - as of 06.06.2012. [Not available separately]