24-1200 Holding sleeve

WARNING: This page is about a different car, the 2011 BMW X6 and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

0491673 241200 Holding sleeve Minimum set: Mechanical tools MW

NOTE: (Assembly sleeve) For preventing damage to the radial sealing ring when sliding it onto the gearshift shaft [Released]

Storage Location

SI number

01 09 90 (282)

Fig 1: Identifying Holding Sleeve (0491673)

Courtesy of BMW OF NORTH AMERICA, INC.