24-0020 Connection

WARNING: This page is about a different car, the 2011 BMW X6 and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

0491618 240020 Connection Minimum set: Mechanical tools MW

NOTE: (Connections) Oil pressure testing accessory for pressure gauge 13 3 061 or BMW DIS for checking the oil pressure. [Released]

Storage Location

Consisting of:

Fig 1: Identifying Connection (0491618)

Courtesy of BMW OF NORTH AMERICA, INC.

= 0491619 Hose
NOTE: (Line) Pressure hose 1.7 m, connection M12x1.5 - M14x1.5 outer thread/For checking the different converter pressures/transmission: A4S 310R A4S 270R discontinued, only available via complete tool [cannot be ordered individually]
= 0491620 Connection
NOTE: (Connection) For checking the main pressure (3 HP 22, A5S 310Z) and clutch A (ZF transmission)/transmission: 3 HP 22, A5S 310Z, A5S 560Z and all ZF transmissions discontinued; only available via complete tool [cannot be ordered individually]
= 0491621 Connection
NOTE: (Connection) Pipe bend, 145 mm, stretched length 145 mm/transmission: 4HP 22, 4 HP 24 discontinued, only available via complete tool [cannot be ordered individually]
= 0491622 Connection
NOTE: (Connection) Pipe bend, 90 mm straightened length 90 mm, discontinued, only available via complete tool [cannot be ordered individually]
= 0491623 Screw
NOTE: (Connection) Banjo bolt M20x1.5 - M18x1.5 / For checking the converter pressure/transmission: 3 HP 12, discontinued, only available via complete tool [cannot be ordered individually]
= 0491624 Connection
NOTE: (Connection) Reducer M24x1.5 - 20x1.5 / For checking the main pressure/transmission: 3 HP 20, discontinued, only available via complete tool [cannot be ordered individually]
= 0491625 Connection
NOTE: (Connection) Reducer M20x1.5 - M18x1.5 / For checking the main pressure (3 HP 12) an converter pressure (3 HP 20)/Transmission: 3HP 12, 3 HP 20, discontinued, only available via complete tool [cannot be ordered individually]
= 0491626 Screw
NOTE: (Screw) M18x1.5 / For closing the engine oil feed pipe when checking the converter pressure/transmission: 3 HP 20, discontinued, only available via complete tool [cannot be ordered individually]
= 0491627 Adapter
NOTE: For closing the feed and return lines when checking the main pressure / transmission: 3 HP 22, discontinued, only available via complete tool [cannot be ordered individually]