13-0190 Fitting aid

WARNING: This page is about a different car, the 2011 BMW X6 and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

0495756 130190 Fitting aid Minimum set: Mechanical tools MW

NOTE: (Installation set) For removing and installing the Teflon rings on the injector. [Released]

Storage Location

C19

Consisting of:

5 = 0495761 Fitting aid
NOTE: (Installation cone) [Released]

Fig 1: Identifying Fitting Aid (0495756)
Courtesy of BMW OF NORTH AMERICA, INC.
4 = 0495760 Holding sleeve
NOTE: (Assembly sleeve 3) [Released]
3 = 0495759 Holding sleeve
NOTE: (Assembly sleeve 2) [Released]
2 = 0495758 Holding sleeve
NOTE: (Assembly sleeve 1) [Released]
1 = 0495757 Pliers
NOTE: [Released]