11-9510 Device

WARNING: This page is about a different car, the 2011 BMW X6 and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

0495471 119510 Device MW

NOTE: For mounting the radial shaft seal of the crankshaft, front. [Discontinued]

Consisting of:

= 0495472 Basic body
NOTE: [Discontinued]
= 0495473 Screw
NOTE: (Screws (2 pieces)) [Discontinued]
= 0495474 Holding sleeve
NOTE: (Sliding sleeve) [blocked]
= 0495475 Holding sleeve
NOTE: (Pressure sleeve) Can no longer be ordered separately. Only available as part of set 11 5 330 = 83 30 0 495 127. [Blocked]
= 0495476 nut
NOTE: (Nut with bearing) Can no longer be ordered separately. Only available as part of set 31 2 120 = 83 30 0 491 909. [Blocked]