11-9260 Holder

WARNING: This page is about a different car, the 2011 BMW X6 and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

0493938 119260 Holder Minimum set: Mechanical tools MW

NOTE: (Counter support with screw connection) For holding the flywheel when gearbox is removed [Released]

Storage Location

B43

SI number

01 01 01 (662)

Consisting of:

= 0494034 Holder
NOTE: (Individual counter support) [Released]

Fig 1: Identifying Holder (0493938)
Courtesy of BMW OF NORTH AMERICA, INC.
= 0494035 Screw
NOTE: (Screw (M10 thread) with washer) For screwing counter support [Released]
= 0494129 Bush
NOTE: (Bush for counter support) For counter support, for retaining flywheel when gearbox is removed Engine: N62, N73 [Released]
= 0494130 Screw
NOTE: (Screw (M12 thread)) For counter support for retaining flywheel when gearbox is removed [Released]
= 0494793 Bush
NOTE: [Released]
= 0495216 Bush
NOTE: For counter support, for retaining flywheel when gearbox is removed Engine: M57TU2 [Released]