11-2000 Extractor

WARNING: This page is about a different car, the 2011 BMW X6 and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

0490798 112000 Extractor Minimum set: Mechanical tools MW

NOTE: For crankshaft sprocket [released]

Storage Location

Consisting of:

7 = 0494316 Synchronizing key
NOTE: Engine: N73 Available only as a complete tool set 11 2 000 = 83 30 0 490 798 - as of 30.11.2011 [not available separately]

Fig 1: Identifying Extractor (0490798)
Courtesy of BMW OF NORTH AMERICA, INC.

= 0490799 Bell housing
NOTE: Liquidation of existing inventory and after that available only as a complete tool set 11 2 000 = 83 30 0 490 798 - as of 30.11.2011 [not available separately]
= 0490800 Plate
NOTE: (Plate) Engine: M10, M30, S14, S38, N73 Liquidation of existing inventory and available only as a complete tool set 11 2 000 = 83 30 0 490 798 - as of 30.11.2011 [not available separately]
= 0490801 Spindle
NOTE: Engine: M10, M30, M70, M73, S14, S38, N73 Liquidation of existing inventory and available only as a complete tool set 11 2 000 = 83 30 0 490 798 - as of 30.11.2011 [not available separately]
= 0490802 Plate
NOTE: Engine: M50, M52, M60, M62 Liquidation of existing inventory and available only as a complete tool set 11 2 000 = 83 30 0 490 798 - as of 30.11.2011 [not available separately]
= 0490803 Spindle
NOTE: (Spindle 165 mm) Engine: M50, M52, M60, M62 Available only as a complete tool set 11 2 000 = 83 30 0 490 798 - as of 30.11.2011 [not available separately]
= 0490804 Plate
NOTE: (Plate) Engine: M70, M73, N73 Available only as a complete tool set 11 2 000 = 83 30 0 490 798 - as of 30.11.2011 [not available separately]