63 12 860 Replacing control unit for left xenon headlight

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2016 BMW 760Li, 2015 BMW 760Li, 2014 BMW 760Li, 2013 BMW 760Li, and 2012 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.

WARNING: Version with xenon lighting system:
Danger to life due to high voltage!
Therefore disconnect all components from voltage supply before removal.
Work on the entire xenon lighting system (ignition unit, control unit and lamp) may only be carried out by specialist personnel.
Comply with notes and instructions on handling EXTERIOR LIGHTS .

Necessary preliminary tasks:

Remove LEFT HEADLIGHT

Release screws (1).

Tightening torque: see 5AZ in 63 12 HEADLIGHT .

Remove control unit for xenon headlight (2) upwards from headlight (3).

Fig 1: Identifying Xenon, Headlight And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

When installing control unit for xenon headlight (1), make sure sealing sleeve (2) is correctly seated.

Fig 2: Identifying Xenon Headlight And Sealing Sleeve

Courtesy of BMW OF NORTH AMERICA, INC.