65 76 610 Removing and installing/replacing right pedestrian protection sensor

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2016 BMW 760Li, 2015 BMW 760Li, 2014 BMW 760Li, 2013 BMW 760Li, and 2012 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.

WARNING: Observe SAFETY INSTRUCTIONS for handling gas generators.
Incorrect handling can activate pedestrian protection and cause injury.

Necessary preliminary tasks:

Disconnect BATTERY CABLE
Remove ORNAMENTAL GRILLE IN BUMPER TRIM .

Release screws (1).

Tightening torque: see 1AZ in 65 76 PEDESTRIAN PROTECTION .

Feed out sensor (2).

Fig 1: Identifying Right Pedestrian Protection Sensor And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Unfasten plug connection (1) and disconnect.

Remove sensor (2).

Fig 2: Identifying Plug Connection And Sensor

Courtesy of BMW OF NORTH AMERICA, INC.