65 77 604 Replacing sensor mat (OC3 mat) for front passenger seat occupancy detector
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2016 BMW 760Li, 2015 BMW 760Li, 2014 BMW 760Li, 2013 BMW 760Li, and 2012 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Version with OC3 mat: vehicles built up to 08/09.
For vehicles built beginning 09/09, see version with CIS MAT .
WARNING:
Note AIRBAG SAFETY REGULATIONS!
Incorrect handling can activate the airbag and cause injury.
Incorrect handling can activate the airbag and cause injury.
WARNING:
US/CDN front passenger seat (with OC3 mat) only:
A faulty OC3 mat can only be removed in conjunction with the upholstery from the seat cover.
If OC3 mat or upholstery is defective, both parts may only be replaced together.
After fitting seat cover, enable OC3 mat with BMW diagnosis system.
A faulty OC3 mat can only be removed in conjunction with the upholstery from the seat cover.
If OC3 mat or upholstery is defective, both parts may only be replaced together.
After fitting seat cover, enable OC3 mat with BMW diagnosis system.
The operation for removing the OC3 mat in conjunction with the upholstery is described in:
- Removing seat cover for front seat. See NORMAL/ELECTRICAL SEAT , SPORTS SEAT , or COMFORT SEAT .
Enabling seat occupancy detector (OC3 mat):
- Connect BMW programming system
- ENCODE airbag control unit
- Delete fault memory if necessary