72 11 092 Removing and installing or replacing rear left or right seat belts

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2016 BMW 760Li, 2015 BMW 760Li, 2014 BMW 760Li, 2013 BMW 760Li, and 2012 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove rear storage shelf. See TRIM PANEL FOR STORAGE SHELF or TRIM PANEL FOR STORAGE SHELF WITH ROLLER SUNBLIND .
Remove rear seat. See BACKREST and REAR SEAT .

Removing left or right automatic reel:

Release screw (1).

Tightening torque 72 11 21AZ .

Installation note:

End fitting is coded against incorrect assembly.

Fig 1: Identifying Belt Feed Cover Screw

G06885827

Courtesy of BMW OF NORTH AMERICA, INC.

Release screw (1).

Tightening torque 72 11 20AZ .

Remove automatic reel (2) with end fitting.

Fig 2: Identifying Screw And Inertia Reel Unit

G04728060

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Pay attention to encoding.

Push inertia reel unit (1) onto body tab (2).

Fig 3: Pushing Inertia Reel Unit Onto Body Lug

G04728061

Courtesy of BMW OF NORTH AMERICA, INC.