LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 3411 (Restraints - Repair) >> Gas Generators, Airbag Modules (With Steering Wheel Airbag 3234) >> 72 12... Unlocking/locking airbag plug connections >> Airbag plug connection on gas generator/airbag module offset by 90°

Airbag plug connection on gas generator/airbag module offset by 90°

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2016 BMW 760Li, 2015 BMW 760Li, 2014 BMW 760Li, 2013 BMW 760Li, and 2012 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.

There are two ways of unlocking this airbag plug connection on the gas generator/airbag module:

Method 1: 

Simultaneously pull cover (1) upwards at lugs on left and right (2).

Fig 1: Pulling Air Bag Plug Connection Cover Upwards
G04728072Courtesy of BMW OF NORTH AMERICA, INC.

Method 2: 

Insert a narrow screwdriver into recess (1) in housing (2).

Carefully press cover (3) off (4).

Fig 2: Pressing Cover Off
G04728073Courtesy of BMW OF NORTH AMERICA, INC.

Cover (1) is not positioned higher than housing (2).

The airbag plug connection is unlocked and can now be detached from the gas generator/airbag module.

Fig 3: Identifying Air Bag Plug Connection Cover And Housing
G04728074Courtesy of BMW OF NORTH AMERICA, INC.

Installation note: 

After attaching airbag plug connection to gas generator/airbag module, press cover (1) downwards until it rests flat on housing.

Check that it catches properly.

Fig 4: Pressing Cover Downwards On Housing
G04728075Courtesy of BMW OF NORTH AMERICA, INC.