37 14 515 Replacing rear left or right ride height sensor: Notes

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2016 BMW 760Li, 2015 BMW 760Li, 2014 BMW 760Li, 2013 BMW 760Li, and 2012 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: Observe SAFETY INFORMATION for raising the vehicle

IMPORTANT: Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC DISCHARGE (ESD PROTECTION) .

Unfasten plug connection (1) and disconnect.

Fig 1: Identifying Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.

Release nut (2) and disconnect jointed rod.

Tightening torque 37 14 4AZ .

Installation note:

Sensor lever (3) must point from ride height sensor to respective rear wheel.

Replace self-locking nut.

Fig 2: Identifying Ride-Height Sensor Lever, Nut And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1) and remove ride-height sensor (3).

Tightening torque 37 14 2AZ .

Replacement:

Release screws (1). Remove holder (2) from ride-height sensor.

Tightening torque 37 14 3AZ .

Fig 3: Identifying Ride-Height Sensor Bracket And Screws

Courtesy of BMW OF NORTH AMERICA, INC.