67 31... Notes on initialization of electric seat actuator drives
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2016 BMW 760Li, 2015 BMW 760Li, 2014 BMW 760Li, 2013 BMW 760Li, and 2012 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Initialization is carried out at the adjusting switch of the relevant seat.
In this process, the end positions of the relevant electric seat actuator drive are recorded and stored.
An initialization must be performed:
- After replacing a drive unit for seat adjustment.
- After replacing/programming control unit for seat adjustment.
Operating sequence for initialization:
Move corresponding seat actuator drive(s) into both end positions.