54 12 497 Removing and installing/replacing wind deflector for glass slide/tilt sunroof

Necessary preliminary tasks: 

• Completely open glass slide/tilt sunroof lid
• Completely open sliding headlining

Press net welt (1) with screwdriver towards rear and pull out of guide.

Replacement only: 

Cut off net from wind deflector to facilitate removal of net welt.

Installation: 

Slide net welt (1) with pointed pliers first on left and right into outermost guide.

Fig 1: Sliding Net Welt

Courtesy of BMW OF NORTH AMERICA, INC.

Press controller (1) for wind deflector forwards against spring.

Press wind deflector inwards and disengage from controller.

Fig 2: Pressing Wind Deflector Controller

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Make sure wind deflector guide is correctly positioned between spring and controller.

Fig 3: Locating Wind Deflector Guide

Courtesy of BMW OF NORTH AMERICA, INC.

Reposition wind deflector and remove towards top.

Fig 4: Removing Wind Deflector

Courtesy of BMW OF NORTH AMERICA, INC.