17 11 150 Removing and installing/replacing engine oil cooler (N74): Recycling

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2016 BMW 760Li, 2015 BMW 760Li, 2014 BMW 760Li, 2013 BMW 760Li, and 2012 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.

Engine oil escapes when the engine oil pipes are released. Catch and dispose of emerging engine oil.

Observe country-specific waste disposal regulations.

Release screw (1).

Tightening torque: see 6AZ in 17 22 ENGINE OIL COOLER LINES AND TRANSMISSION OIL COOLER LINES

Release screw (2).

Tightening torque: see 8AZ in 17 22 ENGINE OIL COOLER LINES AND TRANSMISSION OIL COOLER LINES

Unlock engine oil pipes (3) and detach from engine oil cooler flange.

Seal off engine oil cooler flange and engine oil lines.

Catch and dispose of emerging oil.

Remove engine oil cooler (4).

Fig 1: Identifying Engine Oil Cooler, Pipes And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Check the engine oil level after repair work is completed. Top up engine oil if necessary.