31 12 003 Removing and installing / replacing top right wishbone: Notes
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2016 BMW 760Li, 2015 BMW 760Li, 2014 BMW 760Li, 2013 BMW 760Li, and 2012 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Wishbones with + or - marking (see Fig 1) are camber correction arms:
- Underdimension variant
+ Overdimension variant
These camber correction arms are used to correct the camber values by 30 minutes. To be used only if the tolerance values are exceeded or undershot!
An unmarked wishbone is a standard part.
- Underdimension variant
+ Overdimension variant
These camber correction arms are used to correct the camber values by 30 minutes. To be used only if the tolerance values are exceeded or undershot!
An unmarked wishbone is a standard part.
Necessary preliminary tasks:
- Remove FRONT WHEEL .
- N63: Remove air duct to the intake silencer housing.
- N74: Remove right INTAKE SILENCER HOUSING .
- N47, N53, N54, N57, N63, N74: REMOVE RIGHT ELECTRONICS BOX ON WHEEL ARCH .
- N52T: Remove expansion tank for coolant on right wheel arch.