31 11 040 Removing and installing/replacing stiffening plate
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2016 BMW 760Li, 2015 BMW 760Li, 2014 BMW 760Li, 2013 BMW 760Li, and 2012 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
Observe SAFETY INSTRUCTIONS
for raising the vehicle
Driving without stiffening plate is not permissible!
Driving without stiffening plate is not permissible!
Necessary preliminary tasks:
Release screws (1).
Tightening torque: see 2AZ in 31 10 FRONT AXLE SUSPENSION
Unfasten screws (2).
Tightening torque: see 15AZ in 51 61 REINFORCEMENT, BODY .
Remove stiffening plate (reinforcement plate) (3).
Installation note:
Replace screws.