51 13 116 Removing and installing/replacing cowl panel cover

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2016 BMW 760Li, 2015 BMW 760Li, 2014 BMW 760Li, 2013 BMW 760Li, and 2012 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove BOTH WINDSCREEN WIPER ARMS .

Lever out expander rivets (1) on cover (2) on left/right.

Remove cover (2).

Installation note:

If necessary, replace damaged expanding rivets.

Make sure holders (3) are correctly seated.

Fig 1: Identifying Expanding Rivets, Cover And Holders

Courtesy of BMW OF NORTH AMERICA, INC.

Release expanding rivets (1) on left/right.

Turn snap fastener (2) approx. 90° counterclockwise.

Remove cowl panel cover (3) in upwards direction.

Installation note:

If necessary, replace damaged expanding rivets.

Check cover (3) for correct fit.

Tighten snap fastener (2) from the middle.

The fastener is closed if the arrow tips point to each other.

Fig 2: Identifying Expanding Rivets, Cover And Snap Fasteners

Courtesy of BMW OF NORTH AMERICA, INC.