Prepare front spoiler

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2016 BMW 760Li, 2015 BMW 760Li, 2014 BMW 760Li, 2013 BMW 760Li, and 2012 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.

Clean adhesive area on bumper panel using CLEANING AGENT R2 .

Lay out clamp, adhesive tape and rigid foam block (approx. 105 mm high) for fixing in place.

Clean contact surface (2) of front spoiler.

Apply adhesive bead (Ø = 5 mm) according to dimension (A) to the contact surface (2) of the front spoiler.

Fig 1: Identifying Adhesive Bead Applying Area On Front Spoiler

Courtesy of BMW OF NORTH AMERICA, INC.

= 15 mm from edge of spoiler