Attaching wire in hoisting winch with double coil
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2016 BMW 760Li, 2015 BMW 760Li, 2014 BMW 760Li, 2013 BMW 760Li, and 2012 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.
- Bend over cutting wire end (1) approximately 10 mm and insert into slot of spool (2)
- Repeat process with other end of wire (1) and second spool (2)
- Wind cutting wire (1) onto spools by hand until cutting wire (1) is under slight tension