3.3 Installation of spacer (spacer buffer/dual-lock tapes)
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2016 BMW 760Li, 2015 BMW 760Li, 2014 BMW 760Li, 2013 BMW 760Li, and 2012 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.
Remove all remnants of existing spacers completely before sticking on new spacers.
The exact position of the spacers must be retained (see vehicle-specific repair instructions).
Incorrectly fitted spacers will result in:
- Window glass breakage due to tension
- Leakage (if the spacer is in the adhesive area)
- Wind noises