3.1 Remove adhesive residue from the body and window glass
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2016 BMW 760Li, 2015 BMW 760Li, 2014 BMW 760Li, 2013 BMW 760Li, and 2012 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.
To remove the residual adhesive bead (1) from the body aperture and when reusing on the window glass (3), use the pinchweld scraper (2).
Position the pinchweld scraper (2) as shown and detach residual adhesive bead (1) to a thickness of approx. 0.5 mm.
Do not remove residual adhesive bead (1) until shortly before bonding.