Pressure converter, cylinders 7-12

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2016 BMW 760Li, 2015 BMW 760Li, 2014 BMW 760Li, 2013 BMW 760Li, and 2012 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect plug connection (3) on pressure converter.

Installation note:

Plug connection (3) must snap audibly into place!

Disconnect black vacuum hose (1) at connection (VAC = vacuum reservoir).

Disconnect black vacuum hose (2) at connection (OUT = vacuum unit of exhaust turbocharger).

Fig 1: Identifying Vacuum Hoses, Plug Connection And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Undo screws (4 and 5)

Tightening torque: see 2AZ in 11 00 STANDARD SCREW CONNECTION

Remove pressure converter.

Check activation via BMW diagnosis system.