61 31 172 Removing and installing/replacing switch for electromechanical parking brake
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2016 BMW 760Li, 2015 BMW 760Li, 2014 BMW 760Li, 2013 BMW 760Li, and 2012 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- DISCONNECT NEGATIVE BATTERY CABLE (to avoid fault memory entries)
- F03 Only: Disconnect both battery negative cables
- Remove GEAR SELECTOR SWITCH COVER
Release screws (1).
Remove switch for electromechanical parking brake (2) from cover for gear selector switch (3).