61 31 038 Removing and installing/replacing switch for front passenger airbag deactivation
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2016 BMW 760Li, 2015 BMW 760Li, 2014 BMW 760Li, 2013 BMW 760Li, and 2012 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Read and comply with SAFETY REGULATIONS
for handling airbag modules and pyrotechnical belt pretensioners.
Incorrect handling can lead to airbag deployment and cause injury.
Incorrect handling can lead to airbag deployment and cause injury.
Necessary preliminary tasks:
- Disconnect BATTERY EARTH CABLE
- Disconnect both negative battery cables atF03
Carefully lever out side cover (1) with special tool 00 9 323 .
Disconnect plug connection (1).
Release latch mechanisms (4) in direction of arrow.
Feed switch for front passenger airbag deactivation (2) out of side cover (3).
Installation note:
Make sure switch for passenger airbag deactivation (2) is correctly seated in side cover (3).