61 33 055 Removing and installing/renewing right fanfare horn

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2016 BMW 760Li, 2015 BMW 760Li, 2014 BMW 760Li, 2013 BMW 760Li, and 2012 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove FRONT BUMPER PANEL

Disconnect plug connection (1) and release nut (2).

Remove fanfare horn (3).

Fig 1: Identifying Fanfare Horn With Plug Connection And Nut

Courtesy of BMW OF NORTH AMERICA, INC.

Fig 2: Identifying Electromechanical Fanfare Black Connector, Electronic Fanfare White Connector, Holder And Screw

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: The electromechanical fanfare is installed as standard equipment. Only in China, India, Russia, South Africa and the Gulf States is the electronic fanfare installed as of 01/2011.

: Electromechanical fanfare
: Electronic fanfare

Distinguishing features:

Electromechanical fanfare has a black connector (1)
Electronic fanfare has a white connector (3)
Only the electromechanical fanfare has a small adjusting screw (2)
Holder (4) is vehicle-specific and may differ by vehicle from the graphic.

IMPORTANT: In vehicles with a production data before 01/2011, both fanfares must be replaced in the countries listed above.
The electronic fanfare has a different sound pattern.
Combining the mechanical and electronic fanfares is not permissible.
The connector position may vary slightly.

It is particularly important to ensure that the holder is firmly seated on the vehicle and the fanfare is firmly seated on the holder! The effect on sound is very high!

If the new part is supplied with the holder included, this must be replaced completely with the holder!