61 35 095 Removing and installing control unit/module for seat heating (rear seat)

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2016 BMW 760Li, 2015 BMW 760Li, 2014 BMW 760Li, 2013 BMW 760Li, and 2012 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC DISCHARGE (ESD PROTECTION) .

Necessary preliminary tasks:

REMOVE AND INSTALL REAR SEAT

Disconnect plug connection (1).

Unclip clip (2) and remove control unit for seat heating (3).

Fig 1: Identifying Clip, Plug Connection And Control Unit For Seat Heating

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Make sure mount (1) and retaining lugs (3) of control unit for seat heating (2) are correctly seated.

Fig 2: Identifying Mount, Retaining Lugs And Control Unit For Seat Heating

Courtesy of BMW OF NORTH AMERICA, INC.