LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 3391 (General Electrical System - Repair) >> Auxiliary Cable >> 61 12 013 Replacing battery negative lead

61 12 013 Replacing battery negative lead

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2016 BMW 760Li, 2015 BMW 760Li, 2014 BMW 760Li, 2013 BMW 760Li, and 2012 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Observe safety instructions and instructions for handling vehicle battery. See (SAFETY) INFORMATION ON AGM BATTERY  and NOTES FOR DISCONNECTING AND CONNECTING BATTERY .
Read and comply with notes and instructions on INTELLIGENT BATTERY SENSOR .

Necessary preliminary tasks: 

Slacken nut (1) on negative battery terminal.

Tightening torque: see 1AZ in 61 21 BATTERY WITH TERMINAL .

IMPORTANT: Do not under any circumstances use force to pull off negative terminal.

Detach battery negative lead with intelligent battery sensor (IBS) in upward direction, lay to one side and secure.

Fig 1: Identifying Battery With Nut, Plug Connection And Negative Lead
G06894924Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (2).

Release nut (3) and battery negative lead (4).

Tightening torque: see 6AZ in 61 21 BATTERY WITH TERMINAL .