51 16 Mirrors, Finishers, Ashtrays, Consoles
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2016 BMW 760Li, 2015 BMW 760Li, 2014 BMW 760Li, 2013 BMW 760Li, and 2012 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - MIRRORS, FINISHERS, ASHTRAYS, CONSOLES
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Exterior mirror to front door | F01 / F02 / F03 / F04 / F07 / F10 / F11 / F18 | thread cutting | 6 Nm | |
| New rear view mirror, initial screw connection | 8 Nm | |||
| F25 | thread cutting | 9 Nm | ||
| New rear view mirror, initial screw connection | 11 Nm | |||
| F06 / F12 / F13 | thread cutting | 8 Nm | ||
| 2AZ Sun visor to body | F01 / F02 / F03 / F04 / F07 / F10 / F11 / F18 / F25 | 2.5 Nm | ||
| 3AZ Grab handle, front/rear | F01 / F02 / F03 / F04 / F07 / F10 / F11 / F18 | 3 Nm | ||
| 4AZ Support, center console | F01 / F02 / F03 / F04 / F06 / F07 / F10 / F11 / F12 / F13 / F18 / F25 | 4.5 Nm | ||
| 5AZ Floor trim panel to carrier | F01 / F02 / F03 / F04 | 2.5 Nm | ||
| 6AZ Decorative trim to center console / support | F01 / F02 / F03 / F04 / F06 / F12 / F13 | 1.2 Nm | ||
| 7AZ Holder, center console, front, middle, to tunnel | F01 / F02 / F03 / F04 | 4.5 Nm | ||
| 8AZ Centre console to instrument panel | F01 / F02 / F03 / F04 | 2.5 Nm | ||
| 9AZ Decorative trim to center console | F01 / F02 / F03 / F04 | Dia. 5 mm | Oval-head screw for light alloy | 4 Nm |
| F01 / F02 / F03 / F04 | TS5 x 12 | Plastic screw | 2.8 Nm | |
| 10AZ Centre console / support to dashboard | F01 / F02 / F03 / F04 | 2.5 Nm | ||
| F12 / F13 | 1.2 Nm | |||
| 11AZ Trim, rear, with rear compartment nozzle | F01 / F02 / F03 / F04 | 2.5 Nm | ||
| 12AZ Rear console to body shell holder | F01 / F02 / F03 / F04 | 6 Nm | ||
| 13AZ Oddments tray, center armrest, to support, center console | F01 / F02 / F03 / F04 / F07 | 1.5 Nm | ||
| F06 / F12 / F13 | 1.2 Nm | |||
| 14AZ Handle to inner part, lid, glovebox | F01 / F02 / F03 / F04 / F25 | 1.5 Nm | ||
| 15AZ Lid, glove box / end cover to housing | F01 / F02 / F03 / F04 / F06 / F07 / F10 / F11 / F12 / F13 / F18 | 1.5 Nm | ||
| 16AZ Glove box/storage compartment to dashboard | F01 / F02 / F03 / F04 / F06 / F07 / F10 / F11 / F12 / F13 / F18 | 1.8 Nm | ||
| F25 | 2.4 Nm | |||
| 17AZ Guide rail, roller sunblind, B-pillar | F01 / F02 / F03 / F04 | Self-tapping screw, black | 2 Nm | |
| F03 | Replace screws. | 2.5 Nm | ||
| 18AZ Roller sunblind module | F01 / F02 / F04 | Oval flange head screw (ISA) | 3 Nm | |
| F03 | 8 Nm | |||
| F06 / F07 / F10 / F11 / F18 | 1.5 Nm | |||
| F25 | 0.7 Nm | |||
| 19AZ Electric motor to function carrier | F01 / F02 / F04 | Flat-head screw | 4.4 Nm | |
| F03 | 8 Nm | |||
| 20AZ Engine to function carrier, top | F01 / F02 / F04 | Oval-head screw | 2 Nm | |
| F03 | 3 Nm | |||
| 21AZ Vent window guide rail - window bar connection | F03 | 4.6 Nm | ||
| 22AZ Centre console to support | F07 | 1.8 Nm | ||
| 23AZ Bracket, handle, to bodyshell | F01 / F02 / F04 | 3 Nm | ||
| 24AZ Support to holder, support part | F12 / F13 / F06 | 2.5 Nm | ||
| 25AZ Side bracket to support | F06 / F12 / F13 | 1.2 Nm |