LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 3373 (Rear Axle - Repair) >> Final Drive >> 33 10 010 Removing and installing/replacing rear differential >> Assembly sequence

Assembly sequence

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2016 BMW 760Li, 2015 BMW 760Li, 2014 BMW 760Li, 2013 BMW 760Li, and 2012 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.
  1. Insert the rear axle final drive into the rear axle support using the workshop jack and special tool 33 5 200 .
  2. Insert screws (1) (do not tighten).
  3. Insert bolt from rear and replace nut (2) (do not tighten down).
  4. Release tensioning strap and lower special tool 33 5 200 and move away.
  5. Tighten down screws (1).

    Tightening torque: see 1AZ in 33 17 REAR AXLE DIFFERENTIAL MOUNTINGS .

    Fig 1: Identifying Rear Axle Final Drive Screw And Nut
    G04794559Courtesy of BMW OF NORTH AMERICA, INC.
  6. Tighten nut (2).

    Tightening torque: see 2AZ in 33 17 REAR AXLE DIFFERENTIAL MOUNTINGS .

scientia non olet · About LEMON Manuals