LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 3373 (Rear Axle - Repair) >> Final Drive With Cover >> 33 11... Removing and installing/replacing vibration absorber >> Vibration absorber to rear axle differential, front right

Vibration absorber to rear axle differential, front right

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2016 BMW 760Li, 2015 BMW 760Li, 2014 BMW 760Li, 2013 BMW 760Li, and 2012 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.

Slacken nut (1).

Tightening torque: see 3AZ in 33 17 REAR AXLE DIFFERENTIAL MOUNTINGS .

Remove vibration absorber (2).

Installation note: 

Replace nut.

First, screw the rear axle differential to the rear axle support with the specified tightening torque.

Fig 1: Identifying Rear Axle Differential Vibration Absorber And Slacken Nut
G08484379Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals