LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 3373 (Rear Axle - Repair) >> Final Drive With Cover >> 33 11... Removing and installing/replacing vibration absorber >> Vibration absorber to front adapter

Vibration absorber to front adapter

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2016 BMW 760Li, 2015 BMW 760Li, 2014 BMW 760Li, 2013 BMW 760Li, and 2012 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.

Support rear axle differential.

Slacken nut (1).

Tightening torque: see 1AZ in 33 17 REAR AXLE DIFFERENTIAL MOUNTINGS .

Remove screw and vibration absorber (2).

Installation note: 

Replace nut (1) and screw.

Fig 1: Identifying Front Adapter Vibration Absorber And Screw
G08484383Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals