LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 3373 (Rear Axle - Repair) >> Final Drive With Cover >> 33 11... Removing and installing/replacing vibration absorber >> Vibration absorber to anti-roll bar, right

Vibration absorber to anti-roll bar, right

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2016 BMW 760Li, 2015 BMW 760Li, 2014 BMW 760Li, 2013 BMW 760Li, and 2012 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.

Release screws (1).

Tightening torque: see 3AZ in 33 55 ANTI-ROLL BAR

Remove vibration absorber (2).

Installation note: 

Replace screw.

Fig 1: Identifying Anti-Roll Bar Vibration Absorber And Screws
G08484378Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals