33 32 051 Removing and installing/replacing left or right anti-roll bar link/integral link: Notes
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2016 BMW 760Li, 2015 BMW 760Li, 2014 BMW 760Li, 2013 BMW 760Li, and 2012 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
If the integral link is detached from the swinging arm, it is necessary after installation to carry out a chassis / wheel alignment check.
Necessary preliminary tasks:
- Remove REAR WHEEL .
Release nut (1) and remove screw.
Tightening torque: see 4AZ in 33 32 TRAILING ARMS AND STRUTS
Release screw (2) and remove integral link (3).
Tightening torque: see 5AZ in 33 32 TRAILING ARMS AND STRUTS
Installation note:
Replace screw and nut.
Tighten screw connections in NORMAL POSITION .