33 34 060 Removing and installing/replacing control unit for rear axle slip control: Notes

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2016 BMW 760Li, 2015 BMW 760Li, 2014 BMW 760Li, 2013 BMW 760Li, and 2012 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC DISCHARGE (ESD PROTECTION) .

Necessary preliminary tasks:

REMOVE BATTERY

Unlock plug connection (1) on control unit (2) and disconnect.

Fig 1: Identifying Control Unit And Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.

Release nut (1) and remove control unit (2).

Tightening torque: see 5AZ in 33 34 INTEGRAL ACTIVE STEERING

Fig 2: Identifying Control Unit And Nut

Courtesy of BMW OF NORTH AMERICA, INC.