33 41 Wheel Bearings
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2016 BMW 760Li, 2015 BMW 760Li, 2014 BMW 760Li, 2013 BMW 760Li, and 2012 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - WHEEL BEARINGS
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Output shaft on drive flange hub | F01 / F02 / F04 / F06 / F07 / F10 / F11 / F12 / F13 / F18 / F25 | M27 | Replace collar nut. Jointing torque and angle of rotation must be observed without fail. |
|
| Jointing torque | 100 Nm | |||
| Angle of rotation | 45 ° | |||
| F10 M5 / F12 M6 / F13 M6 | M16 | Observe the repair instructions. | Replace collar bolt and spring. | |
| Jointing torque | 50 Nm | |||
| Angle of rotation | 155 ° | |||
| F03 | M27 | Replace collar nut. | 420 Nm | |
| 2AZ Wheel bearing to wheel carrier | F01 / F02 / F04 / F06 / F07 / F10 / F11 / F12 / F13 / F18 / F25 | M12 | Replace screws. | 100 Nm |