24 11 Transmission housing, transmission oil sump
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2016 BMW 760Li, 2015 BMW 760Li, 2014 BMW 760Li, 2013 BMW 760Li, and 2012 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - TRANSMISSION HOUSING, TRANSMISSION OIL SUMP
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Transmission oil sump | GA6HP19Z / GA6HP26Z / GA6HP32Z | M6 | 10 Nm | |
| 2AZ Oil drain plug | GA6HP19Z / GA6HP26Z / GA6HP32Z / GA8HP45Z / GA8HP70Z / GA8P70H | M16x1.5 M24x1 M18x1 | Plastic oil sump | 8 Nm |
| 3AZ Oil filler plug | GA6HP26Z / GA6HP32Z | M30x1.5 | 80 Nm | |
| GA6HP19Z / GA6HP26Z / GA6HP32Z / GA8HP45Z / GA8HP70Z / GA8P70H / GA8HP90Z | M18x1.5 | 35 Nm | ||
| 4AZ Transmission oil sump | GA8HP45Z / GA8HP70Z / GA8P70H / GA8HP90Z | M6 | Replace aluminium screws; jointing torque and angle of rotation must be observed without fail. | |
| 1. Jointing torque | 4 Nm | |||
| 2. Angle of rotation | 45 ° | |||
| Steel screws | 10 Nm | |||
| 5AZ Oil drain plug | GA8HP90Z | M10 | 12 Nm | |
| 6AZ Heat shield on gearbox | GA8HP45Z / GA8P70Z | M8 | 19 Nm | |
| GA8HP45Z | M6 | 8 Nm | ||
| 7AZ Ground strap to body and transmission | GA8HP45Z, GA8HP70Z, GA8P70H | M8 | 19 Nm |