13 71 Air intake system
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2016 BMW 760Li, 2015 BMW 760Li, 2014 BMW 760Li, 2013 BMW 760Li, and 2012 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - AIR INTAKE SYSTEM
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Clean-air pipe to turbocharger | N74 | M6 | 10 Nm | |
| 2AZ Charge-air tube to turbocharger | N74 | M6 | 10 Nm | |
| 3AZ Intake muffler screw-on foot to cylinder-head cover | N74 | M6 | 10 Nm | |
| 4AZ Clean-air pipe to intake muffler5AZ Charge-air hose to charge-air tube and throttle valve assembly | N74 | Hose clamp | 3 Nm | |
| 5AZ Charge-air hose to charge-air tube and throttle valve assembly | N74 | Hose clamp | 3 Nm | |
| 6AZ Ball stud to coolant pump holder | N74 | M6 | 8.5 Nm | |
| 7AZ Raw-air snorkel to lock support | N74 | 6 Nm | ||
| 8AZ Intake muffler upper part to intake muffler lower part | N74 | 2.5 Nm | ||
| 9AZ Cable clip to intake muffler | N74 | 7.5 Nm | ||
| 10AZ Hose fitting to clean-air pipe | N74 | Hose clamp | 3 Nm | |