13 51 Injection pump, control
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2016 BMW 760Li, 2015 BMW 760Li, 2014 BMW 760Li, 2013 BMW 760Li, and 2012 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - INJECTION PUMP, CONTROL
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ High-pressure pump to cylinder head cover | N74 | M6 | Replace screws. Tighten bolts to final torque/angle in uniform increments of 90°. Follow repair instructions for right or left high pressure pump! |
12 Nm |