11 36 Variable camshaft control
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2016 BMW 760Li, 2015 BMW 760Li, 2014 BMW 760Li, 2013 BMW 760Li, and 2012 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - VARIABLE CAMSHAFT CONTROL
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ VANOS gear to intake and exhaust camshafts | N74 | M10x1 | Replace screw, grease contact surfaces with copper paste | |
| Jointing torque | 30 Nm | |||
| Torque angle | 90 ° | |||
| 2AZ Non-return valve VANOS to cylinder head | N74 | M14 x 1.5 | 20 Nm | |
| 3AZ Solenoid valve holder to cylinder head | N74 | M6 | 10 Nm |