11 31 Camshaft
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2016 BMW 760Li, 2015 BMW 760Li, 2014 BMW 760Li, 2013 BMW 760Li, and 2012 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - CAMSHAFT
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Camshaft bearing cap to cylinder head / high pressure pump bearing cap to cylinder head | N74 | M7 | 15 Nm | |
| 2AZ Tensioning rail and guide rail, cyl. 1 to 6, to crankcase | N74 | M8x1.25 | 20 Nm | |
| 3AZ Tensioning rail and guide rail, cyl. 7 to 12, to crankcase | N74 | M10x1.25 | 46 Nm | |
| 4AZ Guide rail to crankcase, cyl. 7 to 12 | N74 | M7 | 13 Nm | |
| 5AZ Guide rail to cylinder head, cyl. 1 to 6 | N74 | M8 | 22 Nm | |
| 6AZ Guide rail to cylinder head, cyl. 7 to 12 | N74 | M14x1.5 | Bearing bolt | 25 Nm |
| 7AZ Sliding rail to cylinder head | N74 | M7 | Tapered flat nut | 15 Nm |
| 8AZ Chain tensioner | N74 | M7 | 13 Nm |