34 11 Front Brake
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2016 BMW 760Li, 2015 BMW 760Li, 2014 BMW 760Li, 2013 BMW 760Li, and 2012 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.
FRONT BRAKE, BMW, F01, F02, F07 SPECIFICATIONS
|
IMPORTANT:
Installation of new brake pads is approved only provided that the brake disc thickness exceeds the specified dimension (see "MIN TH" below in this table).
Brake discs must be replaced when they reach the nominal thickness minus 2.4 mm! (see "Nominal size" below in this table) (Not applicable to perforated brake discs and M vehicles) . Applies only to M vehicles and perforated ventilated brake discs: The brake discs must be replaced once they wear to the nominal specified thickness minus 1.6 mm! (see "Nominal size" below in this table) . Depending on:
different brake discs can be fitted The brake discs must always be assigned by way of the relevant vehicle identification number and the Electronic Parts Catalogue! |
||
| Different thicknesses on brake linings | Max. mm | 0.01 |
| Nominal size (diameter x thickness) | mm | 324x30 |
| Nominal size (diameter x thickness) | mm | 374x36 |
| Nominal size (diameter x thickness) | mm | 348x36 |
| (MIN TH) is stamped in brake disc chamber | mm | 34.4 |
| Wear warning from residual lining thickness | mm | 3.7 |