LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 3352 (Steering And Wheel Alignment - Repair) >> Pump And Oil Supply >> 32 41 280 Removing and installing/replacing oil reservoir N74 >> Notes

32 41 280 Removing and installing/replacing oil reservoir N74: Notes

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2016 BMW 760Li, 2015 BMW 760Li, 2014 BMW 760Li, 2013 BMW 760Li, and 2012 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: DANGER OF POISONING if oil is ingested/absorbed through the skin!
RISK OF INJURY if oil comes into contact with eyes and skin!
IMPORTANT: Adhere to the utmost cleanliness. Do not allow any dirt to enter the hydraulic system.
Seal off hydraulic lines with seal plugs.

Necessary preliminary tasks: 

Release screws (1) and (2).

Tightening torque 32 41 21AZ

Open hose clamps (3) and (4) and detach lines.

Unlock plug connections on oil level sensor and disconnect.

Remove container.

Installation note: 

Replace hose clamps.

Fig 1: Identifying Hose Clamps And Screws
G08470484Courtesy of BMW OF NORTH AMERICA, INC.