34-3050 Holding sleeve

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2016 BMW 760Li, 2015 BMW 760Li, 2014 BMW 760Li, 2013 BMW 760Li, and 2012 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.

0492472 343050 Holding sleeve MW

NOTE: (Assembly sleeve) With 22 mm diameter to insert the piston with sleeve into the brake master cylinder [Discontinued]

Fig 1: Identifying Holding Sleeve (0492472)

Courtesy of BMW OF NORTH AMERICA, INC.