33-4400 Device

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2016 BMW 760Li, 2015 BMW 760Li, 2014 BMW 760Li, 2013 BMW 760Li, and 2012 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.

0493416 334400 Device MW

NOTE: For removing inner wheel bearing race on rear axle [Released]

SI number

01 05 99 (426)

Consisting of:

3 = 0493818 Wrench
NOTE: (Ignition key) Discontinued, only available via complete tool [cannot be ordered individually]

Fig 1: Identifying Device (0493416)
Courtesy of BMW OF NORTH AMERICA, INC.
4 = 0493819 Wrench
NOTE: (Ignition key) Discontinued, only available via complete tool [cannot be ordered individually]
1 = 0493816 Basic body
NOTE: No longer available separately, only available as part of complete tool set 0493416 = 33 4 400. [Not available separately]
2 = 0493817 Spindle
NOTE: No longer available separately, only available as part of complete tool set 0493416 = 33 4 400. [Not available separately]
5 = 0493820 Pliers
NOTE: (Clamping ring (45 to 51 mm)) No longer available separately, only available as part of complete tool set 0493416 = 33 4 400. [Not available separately]
6 = 0493821 Pliers
NOTE: (Clamping ring (50 to 55 mm)) No longer available separately, only available as part of complete tool set 0493416 = 33 4 400. [Not available separately]
7 = 0494617 Pliers
NOTE: (clamping ring (55...61 mm)) Model series: E67 No longer available separately, only via complete tool set 0493416 = 33 4 400. [Not available separately]
9 = 0496539 Synchronizing key
NOTE: Remaining inventories will be sold off and then it will no longer be available separately, only available as part of complete tool set 0493416 = 33 4 400. [Not available separately]
8 = 0496538 Ring
NOTE: (Clamping ring) [Released]