33-0020 Device

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2016 BMW 760Li, 2015 BMW 760Li, 2014 BMW 760Li, 2013 BMW 760Li, and 2012 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.

0496494 330020 Device MW

NOTE: For removing and installing rubber mounts in rear axle final drive mounting at front. [Released]

Storage Location

C25

SI number

01 18 08 (482)

Consisting of:

1 = 0496500 Washer
NOTE: Removing rubber mount [blocked]

Fig 1: Identifying Device (0496494)
Courtesy of BMW OF NORTH AMERICA, INC.
3 = 0496502 Washer
NOTE: (Shaped washer) Installing rubber mount [blocked]
4 = 0496503 Washer
NOTE: Installing rubber mount [blocked]
2 = 0496501 Bush
NOTE: Removing rubber mount [blocked]
5 = 0496504 Guide
NOTE: (guide bush) Installing rubber mount [blocked]
6 = 0496505 Spindle
NOTE: (Spindle M12x1.5) spindle length 205 mm [blocked]
7 = 0496506 nut
NOTE: (Nut M12x1.5 with thrust bearing) [blocked]