Ideal setting
WARNING: This page is about a different car, the 2011 BMW 750xi, 2011 BMW 750Lxi, 2010 BMW 750xi, and 2010 BMW 750Lxi. However, it is still accessible from the selected car via links, so may be relevant.
- Distance:
- Distance (A) between lid and roof at front and rear must be the same.
- Insert special tool 00 9 341 between gasket and cover. This check (sliding in and pulling out the special tool) must be subject to tightness
- Height:
- Front - flush to 1 mm deeper
- Rear - flush to 1 mm higher